Goto Section: 95.2571 | 95.2579 | Table of Contents

FCC 95.2573
Revised as of September 1, 2021
Goto Year:2020 | 2022
  §  95.2573   MedRadio authorized bandwidths.

   Each MedRadio transmitter type must be designed such that the MedRadio
   emission bandwidth does not exceed the applicable authorized bandwidth
   set forth in this section.

   (a) For MedRadio transmitters operating in the 402-405 MHz band, the
   maximum authorized bandwidth is 300 kHz. Such transmitters must not use
   more than 300 kHz of bandwidth (total) during a MedRadio communications
   session. This provision does not preclude full duplex or half duplex
   communications provided that the total bandwidth of all of the channels
   employed in a MedRadio communications session does not exceed 300 kHz.

   (b) For MedRadio transmitters operating in the 401-401.85 MHz band or
   the 405-406 MHz band, the maximum authorized bandwidth is 100 kHz. Such
   transmitters must not use more than 100 kHz of bandwidth (total) during
   a MedRadio communications session. This provision does not preclude
   full duplex or half duplex communications provided that the total
   bandwidth of all of the channels employed in a MedRadio communications
   session does not exceed 100 kHz.

   (c) For MedRadio transmitters operating in the 401.85-402 MHz band, the
   maximum authorized bandwidth is 150 kHz. Such transmitters must not use
   more than 150 kHz of bandwidth (total) during a MedRadio communications
   session. This provision does not preclude full duplex or half duplex
   communications, provided that the total bandwidth of all of the
   channels employed in a MedRadio communications session does not exceed
   150 kHz.

   (d) For MedRadio transmitters operating in the 413-419 MHz, 426-432
   MHz, 438-444 MHz or 451-457 MHz bands, the maximum 20 dB authorized
   bandwidth is 6 MHz.

   (e) For MedRadio transmitters operating in the 2360-2400 MHz band, the
   maximum authorized bandwidth is 5 MHz.

   (f) Lesser emission bandwidths may be employed, provided that the
   unwanted emissions are attenuated as provided in § 95.2579. See also
   § 95.2567 regarding maximum radiated power limits, § 95.2565 on frequency
   accuracy, § 95.2569 on field strength measurements, and § 95.2585 on RF
   exposure.

   


Goto Section: 95.2571 | 95.2579

Goto Year: 2020 | 2022
CiteFind - See documents on FCC website that cite this rule

Want to support this service?
Thanks!

Report errors in this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
hallikainen.com
Helping make public information public