Goto Section: 80.1181 | 80.1185 | Table of Contents
Revised as of September 1, 2021
Goto Year:2020 |
§ 80.1183 Remote control for maneuvering or navigation.
(a) An on-board station may be used for remote control of maneuvering
or navigation control systems aboard the same ship or, where that ship
is towing a second ship, aboard the towed ship.
(b) The remote control system transmissions must contain a
synchronization signal and a message signal composed of a documentation
number group, a company control group, an actuation instruction group,
and a termination of transmission group.
(1) The synchronization signal must be the control character “SYN”,
(2) The message signal is composed of the following groups:
(i) The documentation number group must be transmitted once and be the
ship's U.S. Coast Guard documentation number or, if the ship is not
documented, the call sign of the on-board station.
(ii) The company control group, composed of three letters taken from
AAA through ZZZ, which must be transmitted one time.
(iiii) The actuation instruction group, composed of two letters taken
from AA through ZZ, which must be transmitted one time.
(iv) The termination of transmission group, composed of the control
character “EM”, which must be transmitted twice.
(c) The receiving system must:
(1) Reject any actuation instruction until it recognizes and accepts
the company control group.
(2) Reject any company control group until it recognizes and accepts
the documentation number group.
(d) The emission employed must be G2D. The provisions applicable to G3E
emission are also applicable to G2D emission.
(e) The binary information must be applied to the carrier as
frequency-shift keying (FSK) of the standard tones 1070 and 1270 Hz.
“0” (low) must correspond to 1070 Hz and “1” (high) must correspond to
1270 Hz. The signalling rate must be 300 bits per second.
(f) The alphabet employed must be the United States of America Standard
Code for Information Interchange (USASCII), contained in the United
States of America Standards Institute publication USAS X3.4-1968.
(1) The bit sequence must be least significant bit first to most
significant bit (bit 1 through 7), consecutively.
(2) The character structure must consist of 8 bits (seven bits plus one
character parity bit) having equal time intervals.
(3) “Odd” parity is required.
Goto Section: 80.1181 | 80.1185
Goto Year: 2020 |
CiteFind - See documents on FCC website that
cite this rule
Want to support this service?
Report errors in
this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please
help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
Helping make public information public