Goto Section: 95.2567 | 95.2571 | Table of Contents

FCC 95.2569
Revised as of October 1, 2020
Goto Year:2019 | 2021
  §  95.2569   MedRadio field strength measurements.

   Compliance with MedRadio equivalent isotropic radiated power (M-EIRP)
   limits can be determined by measuring the radiated field strength from
   the transmitter type, in accordance with the rules in this section.

   (a) Radiated field strength values corresponding to the M-EIRP limits
   in § 95.2567 are given in the table in this paragraph, for an open area
   test site, and for a test site equivalent to free space, such as a
   fully anechoic test chamber. Field strength is measured at a distance
   of 3 meters from the equipment under test.
   M-EIRP
   limit Open
   area
   (mV/m) Free
   space
   (mV/m)
          1 mW   115.1 57.55
          25 µW   18.2   9.1
          250 nW   1.8   0.9
          100 nW   1.2   0.6

   (b) Compliance with the maximum transmitter power requirements in
   § 95.2567 is based on measurements using a peak detector function and
   measured over an interval of time when transmission is continuous and
   at its maximum power level. In lieu of using a peak detector function,
   measurement procedures that have been found to be acceptable to the FCC
   in accordance with § 2.947 of this chapter may be used to demonstrate
   compliance.

   (c) For a MedRadio transmitter intended to be implanted in a human
   body, radiated emissions and M-EIRP measurements for transmissions by
   stations authorized under this section may be made in accordance with
   an FCC-approved human body simulator and test technique. Guidance
   regarding SAR measurement techniques dielectric parameters for the
   tissue-equivalent material can be found in the Office of Engineering
   and Technology (OET) Laboratory Division Knowledge Database (KDB).

   


Goto Section: 95.2567 | 95.2571

Goto Year: 2019 | 2021
CiteFind - See documents on FCC website that cite this rule

Want to support this service?
Thanks!

Report errors in this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
hallikainen.com
Helping make public information public