Goto Section: 2.925 | 2.927 | Table of Contents

FCC 2.926
Revised as of February 25, 2020
Goto Year:2019 | 2021
  § 2.926   FCC identifier.

   (a) A grant of certification will list the validated FCC Identifier
   consisting of the grantee code assigned by the FCC pursuant to
   paragraph (b) of this section, and the equipment product code assigned
   by the grantee pursuant to paragraph (c) of this section. See § 2.925.

   (b) The grantee code assigned pursuant to paragraph (c) of this section
   is assigned permanently to applicants/grantees and is valid only for
   the party specified as the applicant/grantee in the code assignment(s).

   (c) A grantee code may consist of Arabic numerals, capital letters, or
   other characters. The format for this code will be specified by the
   Commission's Office of Engineering and Technology. A prospective
   grantee or its authorized representative may receive a grantee code
   electronically via the Internet at http://www.fcc.gov/eas. The code may
   be obtained at any time prior to submittal of the application for
   equipment authorization. However, the fee required by § 1.1103 of this
   chapter must be submitted and validated within 30 days of the issuance
   of the grantee code, or the code will be removed from the Commission's
   records and a new grantee code will have to be obtained.

   (1) After assignment of a grantee code each grantee will continue to
   use the same grantee code for subsequent equipment authorization
   applications. In the event the grantee name is changed or ownership is
   transferred, the circumstances shall be reported to the Commission so
   that a new grantee code can be assigned, if appropriate. See § 2.929(c)
   and (d) for additional information.

   In the event the grantee name is changed or ownership is transferred,
   the circumstances shall be reported to the Commission so that a new
   grantee code can be assigned, if appropriate. See § § 2.934 and 2.935 for
   additional information.

   (2) [Reserved]

   (d) The equipment product code assigned by the grantee shall consist of
   a series of Arabic numerals, capital letters or a combination thereof,
   and may include the dash or hyphen (-). The total of Arabic numerals,
   capital letters and dashes or hyphens shall not exceed 14 and shall be
   one which has not been previously used in conjunction with:

   (1) The same grantee code, or

   (2) An application denied pursuant to § 2.919 of this chapter.

   (e) No FCC Identifier may be used on equipment to be marketed unless
   that specific identifier has been validated by a grant of equipment
   certification. This shall not prohibit placement of an FCC identifier
   on a transceiver which includes a receiver subject to Suppliers
   Declaration of Conformity pursuant to § 15.101 of this chapter, provided
   that the transmitter portion of such transceiver is covered by a valid
   grant of certification. The FCC Identifier is uniquely assigned to the
   grantee and may not be placed on the equipment without authorization by
   the grantee. See § 2.803 for conditions applicable to the display at
   trade shows of equipment which has not been granted equipment
   authorization where such grant is required prior to marketing. Labeling
   of such equipment may include model or type numbers, but shall not
   include a purported FCC Identifier.

   [ 44 FR 17179 , Mar. 21, 1979, as amended at  46 FR 21014 , Apr. 8, 1981;
    52 FR 21687 , June 9, 1987;  54 FR 1698 , Jan. 17, 1989;  62 FR 10471 , Mar.
   7, 1997;  69 FR 54033 , Sept. 7, 2004;  77 FR 43536 , July 25, 2012;  80 FR 33441 , June 12, 2015;  82 FR 50826 , Nov. 2, 2017]

   return arrow Back to Top

Conditions Attendant to an Equipment Authorization

   return arrow Back to Top


Goto Section: 2.925 | 2.927

Goto Year: 2019 | 2021
CiteFind - See documents on FCC website that cite this rule

Want to support this service?
Thanks!

Report errors in this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
hallikainen.com
Helping make public information public