Goto Section: 76.1803 | 76.1805 | Table of Contents
Revised as of December 7, 2018
Goto Year:2018 |
§ 76.1804 Aeronautical frequencies: leakage monitoring (CLI).
An MVPD shall notify the Commission before transmitting any digital
signal with average power exceeding 10−5 watts across a 30 kHz
bandwidth in a 2.5 millisecond time period, or for other signal types,
any carrier of other signal component with an average power level
across a 25 kHz bandwidth in any 160 microsecond time period equal to
or greater than 10−4 watts at any point in the cable distribution
system on any new frequency or frequencies in the aeronautical radio
frequency bands (108-137 MHz, 225-400 MHz). The notification shall be
made on FCC Form 321. Such notification shall include:
(a) Legal name and local address of the MVPD;
(b) The names and FCC identifiers (e.g., CA0001) of the system
communities affected, for a cable system, and the name and FCC
identifier (e.g., CAB901), for other MVPDs;
(c) The names and telephone numbers of local system officials who are
responsible for compliance with § § 76.610 through 76.616 and § 76.1803;
(d) Carrier frequency, tolerance, and type of modulation of all
carriers in the aeronautical bands at any location in the cable
distribution system and the maximum of those average powers measured
over a 2.5 kHz bandwidth as described in the introductory paragraph to
this rule section;
(e) The geographical coordinates (in NAD83) of a point near the center
of the system, together with the distance (in kilometers) from the
designated point to the most remote point of the plant, existing or
planned, that defines a circle enclosing the entire plant;
(f) Certification that the monitoring procedure used is in compliance
with § 76.614 or description of the routine monitoring procedure to be
(g) For MVPDs subject to § 76.611, the cumulative signal leakage index
derived under § 76.611(a)(1) or the results of airspace measurements
derived under § 76.611(a)(2), including a description of the method by
which compliance with the basic signal leakage criteria is achieved and
the method of calibrating the measurement equipment.
(h) Aeronautical Frequency Notifications, FCC Form 321, shall be
personally signed either electronically or manually by the operator; by
one of the partners, if the operator is a partnership; by an officer,
if the operator is a corporation; by a member who is an officer, if the
operator is an unincorporated association; or by any duly authorized
employee of the operator.
(i) Aeronautical Frequency Notifications, FCC Form 321, may be signed
by the operator's attorney in case of the operator's physical
disability or of his absence from the United States. The attorney shall
in that event separately set forth the reasons why the FCC Form 321 was
not signed by the operator. In addition, if any matter is stated on the
basis of the attorney's belief only (rather than the attorney's
knowledge), the attorney shall separately set forth the reasons for
believing that such statements are true.
(j) The FCC Registration Number (FRN).
[ 68 FR 27003 , May 19, 2003, as amended at 83 FR 7631 , Feb. 22, 2018]
Effective Date Note: At 83 FR 7631 , Feb. 22, 2018, § 76.1804 was amended
by revising the introductory text. This paragraph contains information
collection and recordkeeping requirements and will not become effective
until approval has been given by the Office of Management and Budget.
return arrow Back to Top
Goto Section: 76.1803 | 76.1805
Goto Year: 2018 |
CiteFind - See documents on FCC website that
cite this rule
Want to support this service?
Report errors in
this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please
help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
Helping make public information public