Goto Section: 73.207 | 73.209 | Table of Contents
Revised as of December 4, 2012
Goto Year:2011 |
§ 73.208 Reference points and distance computations.
(a)(1) The following reference points must be used to determine
distance separation requirements when petitions to amend the Table of
Allotments (§ 73.202(b)) are considered:
(i) First, transmitter sites if authorized, or if proposed in
applications with cut-off protection pursuant to paragraph (a)(3) of
(ii) Second, reference coordinates designated by the FCC;
(iii) Third, coordinates listed in the United States Department of
Interior publication entitled Index to the National Atlas of the United
States of America; or
(iv) Last, coordinates of the main post office.
(The community's reference points for which the petition is submitted
will normally be the coordinates listed in the above publication.)
(2) When the distance between communities is calculated using community
reference points and it does not meet the minimum separation
requirements of § 73.207, the channel may still be allotted if a
transmitter site is available that would meet the minimum separation
requirements and still permit the proposed station to meet the minimum
field strength requirements of § 73.315. A showing indicating the
availability of a suitable site should be sumitted with the petition.
In cases where a station is not authorized in a community or
communities and the proposed channel cannot meet the separation
requirement a showing should also be made indicating adequate distance
between suitable transmitter sites for all communities.
(3) Petitions to amend the Table of Allotments that do not meet minimum
distance separation requirements to transmitter sites specified in
pending applications will not be considered unless they are filed no
(i) The last day of a filing window if the application is for a new FM
facility or a major change in the non-reserved band and is filed during
a filing window established under section 73.3564(d)(3); or
(ii) The cut-off date established in a Commission Public Notice under
§ 73.3564(d) and 73.3573(e) if the application is for a new FM facility
or a major change in the reserved band; or
(iii) The date of receipt of all other types of FM applications. If an
application is amended so as to create a conflict with a petition for
rule making filed prior to the date the amendment is filed, the amended
application will be treated as if filed on the date of the amendment
for purposes of this paragraph (a)(3).
Note: If the filing of a conflicting FM application renders an
otherwise timely filed counterproposal unacceptable, the
counterproposal may be considered in the rulemaking proceeding if it is
amended to protect the site of the previously filed FM application
within 15 days after being placed on the Public Notice routinely issued
by the staff concerning the filing of counterproposals. No proposals
involving communities not already included in the proceeding can be
introduced during the reply comment period as a method of resolving
conflicts. The counterproponent is required to make a showing that, at
the time it filed the counterproposal, it did not know, and could not
have known by exercising due diligence, of the pendency of the
conflicting FM application.
(b) Station separations in licensing proceedings shall be determined by
the distance between the coordinates of the proposed transmitter site
in one community and
(1) The coordinates of an authorized transmitter site for the pertinent
channel in the other community; or, where such transmitter site is not
available for use as a reference point,
(2) Reference coordinates designated by the FCC; or, if none are
(3) The coordinates of the other community as listed in the publication
listed in paragraph (a) of this section; or, if not contained therein,
(4) The coordinates of the main post office of such other community.
(5) In addition, where there are pending applications in other
communities which, if granted, would have to be considered in
determining station separations, the coordinates of the transmitter
sites proposed in such applications must be used to determine whether
the requirements with respect to minimum separations between the
proposed stations in the respective cities have been met.
(c) The method given in this paragraph shall be used to compute the
distance between two reference points, except that, for computation of
distance involving stations in Canada and Mexico, the method for
distance computation specified in the applicable international
agreement shall be used instead. The method set forth in this paragraph
is valid only for distances not exceeding 475 km (295 miles).
(1) Convert the latitudes and longitudes of each reference point from
degree-minute-second format to degree-decimal format by dividing
minutes by 60 and seconds by 3600, then adding the results to degrees.
(2) Calculate the middle latitude between the two reference points by
averaging the two latitudes as follows:
ML=(LAT1dd +LAT2dd )÷2
(3) Calculate the number of kilometers per degree latitude difference
for the middle latitude calculated in paragraph (c)(2) as follows:
KPDlat =111.13209−0.56605 cos(2ML)+0.00120 cos(4ML)
(4) Calculate the number of kilometers per degree longitude difference
for the middle latitude calculated in paragraph (c)(2) as follows:
KPDlon =111.41513 cos(ML)−0.09455 cos(3ML)+0.00012 cos(5ML)
(5) Calculate the North-South distance in kilometers as follows:
NS=KPDlat (LAT1dd −LAT2dd )
(6) Calculate the East-West distance in kilometers as follows:
EW=KPDlon (LON1dd −LON2dd )
(7) Calculate the distance between the two reference points by taking
the square root of the sum of the squares of the East-West and
North-South distances as follows:
DIST=(NS2 + EW2 )0.5
(8) Round the distance to the nearest kilometer.
(9) Terms used in this section are defined as follows:
(i) LAT1dd and LON1dd =the coordinates of the first reference point in
(ii) LAT2dd and LON2dd =the coordinates of the second reference point
in degree-decimal format.
(iii) ML=the middle latitude in degree-decimal format.
(iv) KPDlat =the number of kilometers per degree of latitude at a given
(v) KPDlon =the number of kilometers per degree of longitude at a given
(vi) NS=the North-South distance in kilometers.
(vii) EW=the East-West distance in kilometers.
(viii) DIST=the distance between the two reference points, in
[ 28 FR 13623 , Dec. 14, 1963, as amended at 29 FR 14116 , Oct. 14, 1964;
48 FR 29505 , June 27, 1983; 52 FR 37788 , Oct. 9, 1987; 52 FR 39920 ,
Oct. 26, 1987; 54 FR 9806 , Mar. 8, 1989; 57 FR 36020 , Aug. 12, 1992; 58 FR 38537 , July 19, 1993]
return arrow Back to Top
Goto Section: 73.207 | 73.209
Goto Year: 2011 |
CiteFind - See documents on FCC website that
cite this rule
Want to support this service?
Report errors in
this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please
help us improve these rules by clicking the Report FCC Rule Errors link to report an error.
Helping make public information public