FCC 22.589 Revised as of December 4, 2012
Goto Year:2011 |
§ 22.589 One-way or two-way application requirements.
In addition to information required by subparts B and D and § 22.529,
applications for authorization to operate a paging transmitter on the
channels listed in § 22.531, other than applications for a paging
geographic area authorization, must contain the applicable
supplementary information described in this section.
(a) Interference exhibit. Except as provided in paragraph (b) of this
section, an exhibit demonstrating compliance with § 22.567 with regard
to protected transmitters is required. This exhibit must:
(1) For UHF channels, identify each protected transmitter located
within 108 kilometers (67 miles) of the proposed transmitter in
directions in which the distance to the interfering contour is 76.4
kilometers (47.5 miles) or less, and within 178 kilometers (111 miles)
of the proposed transmitter in directions in which the distance to the
interfering contour exceeds 76.4 kilometers (47.5 miles); and identify
each protected Basic Exchange Telephone Radio System central office
transmitter in the Rural Radiotelephone Service within 231 kilometers
(2) For VHF channels, identify each protected transmitter located
within 135 kilometers (84 miles) of the proposed transmitter in
directions in which the distance to the interfering contour is 93.3
kilometers (58 miles) or less, and within 178 kilometers (111 miles) of
the proposed transmitter in directions in which the distance to the
interfering contour exceeds 93.3 kilometers (58 miles).
(3) For each protected transmitter identified, show the results of
distance calculations indicating that there would be no overlap of
service and interfering contours, or alternatively, indicate that the
licensee of or applicant for the protected transmitter and/or the
applicant, as required, have agreed in writing to accept any
interference resulting from operation of the proposed transmitter.
(b) Encompassment exhibit. An exhibit showing that the area within the
interfering contour of the proposed transmitter would be totally
encompassed by interfering contours of operating co-channel base
transmitters controlled by the applicant is required for applications
to operate a transmitter with ERP exceeding the basic power and
height-power limits of § 22.565. This encompassment exhibit may
substitute for the interference exhibit required in paragraph (a) of
[ 59 FR 59507 , Nov. 17, 1994, as amended at 62 FR 11636 , Mar. 12, 1997]
return arrow Back to Top
return arrow Back to Top
CiteFind - See documents on FCC website that
cite this rule
Want to support this service?
Report errors in
this rule. Since these rules are converted to HTML by machine, it's possible errors have been made. Please
help us improve these rules by clicking the Report FCC Rule Errors link to report an error.